IEC60061-3 Lampcap Gauges
1. Introduction
The lampcap gauges are designed according to IEC60061-3. It is also be known as “Go” and “Not Go” gauges for testing lampcaps like E14, E27, E40, G5, G13, B15 and etc.. The structure and sharp (like thread wave) of gauges are calculated and optimized by computer, and then process by computer machine to reach high precision and nice-looking. The lamp cap gauges (go no go gauge) is made by high-hardness alloy, the rockwell hardness can reach HR580 above. The Lampcap gauges can pass the calibration of an ISO17025 authorized lab, and get the calibration certificate.
2. List of lampcap gauges
| Figure Number | Description |
E27 Lamp Cap Gauge | |
| 7006-27B-1 | “Go” gauge for E27 caps on finished lamps |
| 7006-27C-1 | “Go” gauge for dimension “S1” of E27 caps on finished lamps |
| 7006-28A-1 | “Not Go” gauge for E27 caps on finished lamps |
| 7006-50-1 | Gauge for finished lamps fitted with E27 caps for testing contact making |
| 7006-51-2 | Gauge for caps on finished lamps for testing protection against accidental contact |
| 7006-51A-2 | Gauge for caps on finished lamps for testing protection against accidental contact during insertion |
E14 Lamp cap Gauge | |
| 7006-27F-1 | “Go” gauge for E14 caps on finished lamps |
| 7006-27G-1 | “Go” gauge for dimension “S1” of E14 caps on finished lamps |
| 7006-28B-1 | “Not Go” gauge for E14 caps on finished lamps |
| 7006-54-2 | Gauge for finished lamps fitted with E14 caps for testing contact making |
| 7006-55-2 | Gauge for finished lamps fitted with E14 caps for testing protection against accidental contact |
E12 Lamp Cap Gauge | |
| 7006-27H-1 | “Go” gauge for caps on finished lamps |
| 7006-27J-1 | Additional “Go” gauge for caps on finished lamps |
| 7006-28C-1 | “Not Go” gauge for caps on finished lamps |
| 7006-32-1 | gauge for finished lamps fitted with E12 caps for testing contact-making |
E26 lamp cap gauge | |
| 7006-27D-3 | “Go” gauge for caps |
| 7006-29L-4 | “Not Go” gauge for caps |
| 7006-29-3 | Gauge for testing contact-making of lamps fitted with caps |
E17 Lamp Cap Gauge | |
| 7006-27K-1 | “Go” gauge for caps on finished lamps |
| 7006-28F-1 | “Not Go’ gauge for caps on finished lamps |
| 7006-26D-1 | Gauge for testing contact-making of lamps fitted with caps |
E39 Lamp Cap gauge | |
| 7006-24A-1 | Gauge for finished lamps fitted with E39 caps for testing contact-making |
| 7006-24B-1 | “Go” gauge for caps on finished lamps |
| 7006-24C-1 | Gauge for testing contact-making of lamps fitted with caps |
E40 Lamp Cap gauge | |
| 7006-27-7 | “Go” gauge for caps on finished lamps |
| 7006-28D-1 | “Not Go” Gauge for caps on finished lamps |
| 7006-52-1 | Gauge for finished lamps fitted with E40 caps for testing contact making |
| 7006-53-1 | Gauge for finished lamps fitted with E40 caps for testing protection against accidental contact |
G13 Lamp Cap gauge | |
| 7006-44-4 | “Go” and “Not Go” gauge for unmounted Bi-Pin cap |
| 7006-45-4 | “Go” gauge for BI-Pin cap on finished lamps |
GU10 Lamp Cap gauge | |
| 7006-121-1 | Go and Not Go Gauge for Bases |
B22 & B22D Lamp Cap Gauge | |
| 7006-10-8 | Not Go Gauge for Caps on Finished Lamps |
| 7006-11-8 | Go gauge for Caps on Finished lamps BA9, B15, BA15 & B22 |
| 7006-4A-2 | Gauges for Testing the Insertion of Caps in lampholders B15d, B22d & BY22d |
| 7006-4B-1 | Gauges for Testing the Retention of B15d and B22d Caps in the Holder |
| 7006-3-1 | Acceptance Gauge for B22d Caps Intended for Automatic Wire Threading |
| 7006-17A-1 | Go Gauge for Cap on Finished Lamps BY22d |
G5 Lamp Cap Gauge | |
| 7006-46-3 | Go and Not Go gauge for Unmounted BI-PIN Cap |
| 7006-46A-3 | “Go” Gauge for BI-PIN Cap on Finished Lamps |
B22 Lamp Cap Gauge | |
| 7006-10-8 | Not Go Gauge for Caps on Finished Lamps |
| 7006-11-8 | Go gauge for Caps on Finished lamps BA9, B15, BA15 & B22 |
| 7006-4A-2 | Gauges for Testing the Insertion of Caps in lampholders B15d, B22d & BY22d |
| 7006-4B-1 | Gauges for Testing the Retention of B15d and B22d Caps in the Holder |
| 7006-3-1 | Acceptance Gauge for B22d Caps Intended for Automatic Wire Threading |
| 7006-17A-1 | Go Gauge for Cap on Finished Lamps BY22d |
B15 Lamp Cap Gauge | |
| 7006-4A-2 | B15 Lamp Cap and holder GO and Not Go Gauges |
| 7006-4B-1 | Gauges for testing the retention of B15d and B22d caps in the holder |
| 7006-10-8 | Not Go gauges for caps on finished lamps BA9, B15, B22 and BY22d |
| 7006-11-8 | Go gauges for caps on finished lamps BA9, B15, BA15 and B22 |
Note: please specify the figure number for enquiry.
