Tumbling Barrel (Model: TB-31)
1.Introduction
The tumbling barrel is designed according to IEC60068-2-31 clause 5.3/figure A.1, IEC60598-1 clause 4.13.5, IEC60884-1 clause 24.2 for repeat free fall test. The test is to check the mechanical strength of the electrical appliance like plugs and socket-outlets, the sample shall be placed in the tumbling barrel and subjected to prescribed number of falls. The operation panel is equipped with an emergency stop button, which is convenient for stopping the test at any time.
2. Specification
| Control units | Button control+meter/touch screen |
| Test station | 1 |
| Rotating speed | 5R/min |
| Rate of fall | 10 falls/min |
| Falling height | 500mm or 1000mm optional |
| Number of falls |
0-999999 (settable) Complete the prescribed number of falls, the equipment will auto stop |
| Configuration |
Two-end steel sheet thickness: 3mm Body steel sheet thickness: 1.5mm Backed hardwood: plywood with thickness 10-19mm Bevel: backed by 2 wedge-shaped chip-resistant rubber with a hardness of 80±20IRHD as per ISO48 |
| Sizes |
Width: 220mm Other sizes as below:
|
