Oven and Cooktop Test Blocks
1.Introduction
The oven and cooktop test block is designed according to CAN/CSA-C358-03 standard, it is made of No. 6061 aluminum and each one will equip with a handle.
2. Parameter
Cooktop test blocks | |||
| Oven test block* | Small | Large | |
| Diameter | 158±1.3 | 158±1.3 | 228.6±1.3 |
| Appropriate height | 71 | 71 | 76 |
| Weight | 3.85±0.05 | 3.85±0.05 | 8.62±0.05 |
| Surface roughness (um) rms | 0.8 | 0.8 | 0.8 |
*The over test block shall be anodized with a matte black hard coating 0.025mm minimum thickness or with a finish having the equivalent absorptivity. Adjust the height to match the weight Weight includes the handle support screws | |||
Notes: (1) The material of the test blocks shall be aluminum, alloy no.6061, 96%+ pure, with specific heat capacity of 963 J/kg at 0-20 (2) The bottom of all test blocks shall be flat to within 0.051mm | |||
