Gauges for Flat and Round Pin Plugs (AS/NZS 3112 figure F1)
1. Introduction
Gauges for flat and round pin plugs are designed according to AS/NZS 3112 figure F1 and clauses 2.8.1 & 2.13.7.1 & 2.13.7.2, for dimension checking in general test, after free fall test and before pin bending test.
2. Specification
| Material | Hardened steel |
| Quantity | 2 (Gauge for two flat live pins and a round earth pin plug*1, gauge for two round live pins and a flat earth pin plug *1) |
| Dimension | As per AS/NZS 3112 figure F.1) |
AS/NZS 3112 Figure F1
