IEC60079-11 Intrinsically Safe Battery Short-Circuit Tester

In explosive hazardous environments such as coal mines, oil & gas and chemical plants, intrinsically safe (“i”) batteries serve as the power source for explosion-proof instruments, gas detectors and underground sensing equipment. Once a battery suffers an external short circuit, the released electric energy, electric arcs and high temperature may easily ignite explosive gas mixtures and trigger explosions.

The IEC 60079-11 Intrinsically Safe Battery Short-Circuit Tester is developed specifically in accordance with IEC 60079-11 for verifying the safety of intrinsically safe batteries and battery packs under external short-circuit conditions. It is essential test equipment for type tests required for IECEx, ATEX and GB 3836.4 intrinsic safety certification.

 

1. Applicable Standards

Primary Standard: IEC 60079-11:2023 (Edition 7) Explosive atmospheres – Part 11: Equipment protection by intrinsic safety “i” Corresponding National Standard: GB 3836.4 Explosive atmospheres – Part 4: Equipment protected by intrinsic safety “i” Also compatible with: ATEX, IECEx and UKEX certification requirements. It covers the battery and battery pack short-circuit fault test clause in Clause 9.14 of the standard. The total resistance of the short-circuit loop shall be ≤ 3 mΩ. The short-circuit point shall be as close to the battery terminals as possible. Tests shall be carried out under two fault conditions: with current-limiting components in service and with current-limiting components shorted, to verify that ia / ib intrinsically safe batteries will not ignite explosive media under short-circuit conditions.

 

2. Test Principle

The equipment adopts a low-impedance high-current closed-loop scheme to artificially create an external short-circuit fault at the battery terminals, simulating extreme accidental short-circuit scenarios on site. The test sample is placed inside an explosion-proof test chamber before the test starts. A low-impedance short-circuit contactor closes rapidly to deliver short-circuit current under the ultra-low loop resistance specified by the standard. The system captures voltage, current and temperature time-series data at high speed and continuously monitors the sample status. The loop will be automatically disconnected once the set duration is reached or a protection threshold is triggered.

Key observations during the test: whether the battery catches fire, explodes, suffers casing rupture, electrolyte leakage or thermal runaway, and whether the released energy exceeds the threshold for igniting explosive gas. The test result determines whether the battery meets the energy limitation requirements for ia / ib intrinsic safety level.

Core difference from ordinary lithium battery short-circuit testers: the IEC 60079-11 intrinsic safety short-circuit test focuses on strictly controlling loop impedance rather than simply pursuing high current. It assesses the released short-circuit energy and spark ignition capability instead of thermal runaway breaking capacity for power batteries.

 

3. Main Applications

3.1 Type tests for intrinsically safe primary batteries, lithium batteries, battery packs and intrinsic safety power modules;

3.2 Safety verification of batteries for explosion-proof gas detectors, mining sensors, explosion-proof handheld instruments and valve-controlled intrinsic safety power supply units;

3.3 Sample testing for IECEx, ATEX and GB 3836 explosion-proof certification, and third-party testing at CNAS-accredited laboratories;

3.4 Fault simulation in R&D: verify the suppression effect of current-limiting components such as PTCs and current-limiting resistors and protection boards;

3.5 Incoming quality control, factory sampling inspection and annual re-evaluation to verify batch consistency of intrinsically safe batteries.

 

4. Core Technical Specifications (Standard configuration, customisable)

Control unit

PLC+touch screen

Max. Permissible Test Sample Size

300mm*300mm*300mm

Working Dimensions of Explosion-Proof Chamber

500mm*500mm*500mm

Test voltage

0-100V

Voltage channel

1

Voltage display accuracy

±0.5%

Test current

0-1500A

Test temperature

R.T~100℃

Temperature uniformity

±2℃

Temperature fluctuation

±0.5℃

Display accuracy

±0.1℃

Temperature rising time

(5+1)℃/min

Action method

Double integral method

Impulse Voltage

AC 1 kV / 1.2–50 μs (Peak), 1 min

Internal resistance

≤3mΩ

Sampling interval

100ms

Test Time

Can be set arbitrarily

 

5. Summary

Conventional lithium battery short-circuit testers mainly focus on thermal runaway, fire and explosion assessment. The IEC 60079-11 Intrinsically Safe Battery Short-Circuit Tester centres on energy limitation and anti-ignition. It is dedicated test equipment for the explosion-proof intrinsic safety sector. For explosion-proof instrument manufacturers, third-party explosion-proof testing laboratories and mining / petrochemical equipment enterprises, it is not only a must-have device for compliance certification, but also a critical tool to safeguard electrical safety in hazardous areas.

 

Temperature-Controlled Battery Short Circuit Test Chamber
You May Like
Scroll to Top