0.5J Spring Hammer for Impact Test to Appliance Coupler

1. Introduction

0.5J spring hammer applies for performing the impact test, to appliance inlets designed for surface-mounting and the insulating material shrouds of plug connectors and appliance outlets. 0.5J spring hammer designs according to IEC60068-2-75 test Ehb, the hammer head has a hemispherical face of polyamide with radius of 10mm.

As per standard IEC60320-1 clause 23.4, the test sample is rigidly supported and 12 impacts are applied, there to each of four places chosen so as to include the weakest.

2. Specification

Degrees of protection against external mechanical impacts