Go and Not Go Gauges for Appliance Couplers (Connector / Appliance outlet, Appliance Inlet/Plug Connector)
1.Introduction
Go not go gauges are strictly designed according to EN60320-3:2014 figure 2 to figure 31, for testing the appliance couplers (C1 to C24, F, H, J, L) for household and similar general purpose. The gauges are used with force as mentioned in the relevant standard sheet of the gauge to perform insertion compliance test. And the gauges and pins are made of hardened steel.
2. Specification
Standard | Figure number and gauge name |
IEC/EN 60320-3:2014 | Figure 2 – Go Gauge for Connectors to Standard Sheet C1 |
Figure 3 – Go Gauge for Connectors to Standard Sheet C5 | |
Figure 4 – Go Gauge for Connectors to Standard Sheet C7 | |
Figure 5 – Go Gauge for Side-entry Connectors to Standard Sheet C7 | |
Figure 6 – Not Go Gauge for Connectors to Standard Sheets C1 | |
Figure 7 – Not Go Gauge for Connectors to Standard Sheets C1, C5 and C7 | |
Figure 8 – Not Go Gauge for Connectors to Standard Sheets C1 and C7 | |
Figure 9 – Blades for Checking The Resistance Against Deformation of The Front Part of The Connectors to Standard Sheet C7 | |
Figure 10 – Not Go Gauge for Appliance Inlets to Standard Sheet C8, C8A and C8B | |
Figure 11 – Go Gauge for Connectors to Standard Sheet C9 | |
Figure 12 – Not Go Gauge for Connectors to Standard Sheet C9 | |
Figure 13 – Go Gauge for Appliance Inlets to Standard Sheets C10 | |
Figure 14 – Go Gauge for Connectors to Standard Sheet C13 | |
Figure 15 – Not Go Gauge for Connectors to Standard Sheets C13 and C17 | |
Figure 16 – Go Gauge for Appliance Inlets to Standard Sheets C14, C16 and C18 | |
Figure 17 – Go Gauge for Connectors to Standard Sheet C15 | |
Figure 18 – Go Gauge for Connectors to Standard Sheet C17 | |
Figure 19 – Go Gauge for Connectors to Standard Sheet C19 | |
Figure 20 – Go Gauge for Appliance Inlets to Standard Sheets C20 and C24 | |
Figure 21 – Go Gauge for Connectors to Standard Sheet C21 | |
Figure 22 – Go Gauge for Appliance Inlets to Standard Sheet C22 | |
Figure 23 – Go Gauge for Connectors to Standard Sheet C23 | |
Figure 24 – Not Go Gauge for Connectors to Standard Sheets C13, C15 and C17 | |
Figure 25 – Go Gauge for Connectors to Standard Sheet C15A | |
Figure 26 – Go Gauge for Appliance Inlets to Standard Sheet C16A | |
Figure 27 – Go Gauge for Appliance Outlets to Standard Sheet F | |
Figure 28 – Go Gauge for Appliance Outlets to Standard Sheet H | |
Figure 29 – Go Gauge for Appliance Outlets to Standard Sheet J | |
Figure 30 – Go Gauge for Appliance Outlets to Standard Sheet L | |
Figure 31 – Gauges for Checking Point of First Contact (0.2A) | |
Figure 31 – Gauges for Checking Point of First Contact (2.5A) | |
Figure 31 – Gauges for Checking Point of First Contact (6A) | |
Figure 31 – Gauges for Checking Point of First Contact (10A) | |
Figure 31 – Gauges for Checking Point of First Contact (16A-E) | |
Figure 31 – Gauges for Checking Point of First Contact (16A-L) |
