Apparatus for Checking Damage to Conductors
1.Introduction
The apparatus for checking damage to conductors is designed to meet the test requirements of IEC60884-1:2022 clause 12.2.5 and figure 13, IEC60669-1, IEC62052-31 clause 6.9.7.3 (for flexion test). It is applied to checking if the terminal with screw clamping or screwless clamping can withstand the mechanical stress in normal use, and judging whether the design and structure of the screw clamping terminal meet the requirements of not excessively damaging the conductor when it clamps the conductor.
2. Specification
| Model | PG-ADG | PG-ADG1 | PG-ADG2 |
| Control mode | Electric control | ||
| Working station | 1 | ||
| Working speed | 10±2r/min | ||
| Bushing rotation diameter | 75mm | ||
| Test time | 0-99min59s (test time can be preset, and stop automatically when time up) | ||
| Configured mass | 0.3KG, 0.4KG, 0.7KG, 0.9KG, 1.4KG, 2.0KG | 0.3KG,0.4KG, 0.7KG, 0.9KG, 1.4KG, 2.0KG | 0.4KG, 0.7KG, 0.9KG, 1.4KG, 2.0KG, 2.9KG, 4.5KG, 6.8KG, 9.5KG |
| Test height | 260mm, 280mm | 260mm, 280mm, 300mm | 260mm, 280mm, 300mm, 320mm, 343mm |
| Diameter of bushing hole | 6.5mm, 9.5mm | 6.5mm, 9.5mm, 13mm | 6.5mm, 9.5mm, 9.4mm, 13.0mm, 14.5mm, 15.9mm |
| Height adjusting mode | Manual adjustable (250mm-600mm adjustable) | ||
| Maximum conductor cross-section it can test | ≤10.0mm2 | ≤25.0mm2 | ≤50.0mm2 |
| Dimension and weight | L530mm*D500mm*H800mm/80kg | L1000mm*D400mm*H1300mm, 150kg | |
| Working power | AC220±10%, 50/60Hz | ||
| Working condition | 5-35℃ (temp.), 30%-90%R.H. | ||
| Standard conform to | IEC60884-1 clause 12.2.5/figure 13 | IEC60669-1 clause 12.2.5/figure 9 | IEC62052-31 clause 6.9.7.3/figure H.1 |
